Intex Aqua 3G+ (Plus) Pattern Unlock Done Without Flash

In this device i was try to hard reset for remove pattern lock but not success using every tricks volume keys for power but if you want to remove pattern lock without flashing then you can use this tutorial because this is every simple tricks no nay risk or will be any issue because this is tested by me without any error and just a few minute in this tutorial i use miracle box for that but don't worry you can other use chines box but will be option in that because you can't pattern unlock without option, in internet one other way for pattern unlock just you have to download few mb flash file and you can do job using sp flash tool and it also simple way for that just remember every needed for pattern unlock now let's go how to pattern unlock intex aqua 3g+ using miracle box ?

Download Link

Intex Aqua 3G+ (Plus) Pattern Unlock file only Download Here

Intex Aqua 3G+ (Plus) full firmware Download Here

ResearchDownload_VER_2.9.7006 Download Here

Required for Pattern Unlock:

1. Intex Aqua 3G+ (plus) device with good battery charged

2. Miracle box (you can use other chines box)

3. Micro usb cable

4. Computer or Laptop

Procedure:

1. First download tested firmware or unlock file from above link

2. Open Miracle box

3. Go to SPD Tab

4. Choose Write option

5. Select correct boot option : SPD8825/6825/Other{Factory File Write)

6. Choose firmware file which you was downloaded

7. Tick on USBCable option

8. Now last click on Start button

9. Press and hold Volume Down button and insert usb cable

10. After few second wait then one popup box there untick all without 'USERDATA' then click ok

11. Wait until process

12. Congratulation you are done

Hard Reset LG G Vista 2 Smartphone

We are ready to fix the problems that have involved with the LG G Vista 2 Vista smartphone also by followed by the best android smartphone hard reset tips. LG smartphone is not a low quality smartphone. It also comfortable to use as long time. So if you want to use this smartphone as like yourself then you have to follow the several aspects for protect your LG smartphone. In a few time someone has forgotten their smartphone password that would not work properly after tried more and more on the other hand someone has forget their pattern code and PIN that may will require when you will forget pattern code. However not only this there have a lot cause as a result, you can’t use the cell phone as comfortably to long time. I hope you will get back the smartphone performance after using hard reset tips via android hard reset blog. Now you can see the blow how to hard reset LG G Vista 2 smartphone and try to make a hard reset on your LG smartphone.

Hard Reset LG G Vista 2

Symptoms of LG Smartphone hard reset

1. Ram & Rom Full Fill: When a user uses their android Smartphone long time. Then they face something problem from the Smartphone. After a few days, an android user installs deferent kind of App on their Smartphone or tablets. Once the smartphone RAM and ROM will full fill. Then the phone start to show the problem with the user. We are in here how to hard reset LG G Vista 2
2. Forget Google Play store password: Sometimes an android user forgets their Google account password. So, they need hard reset or factory data reset the Smartphone. We are in here how to hard reset LG G Vista 2
3. Pattern lock code: Pattern lock is the most usable lock for android user. Sometimes the user forgets the Pattern lock. So, for unlocking the Smartphone and tablets they need to hard reset or factory data reset. We are in here how to hard reset LG G Vista 2

Tips for Hard Reset LG G Vista 2

1) Switch off the mobile and wait around 10-15 sec

2) This is important point for hard Reset LG G Vista 2 Keep in same time Volume (-) and power buttons in same time. After 3 secondrelease the power button Then you will face the display below as like as android recovery screen.

3) Now press and hold the Vol (-) Button and hold it, see the factory reset menu is active now.

4) Now press the power button for android recovery option and conform.

5) From the menu items you should select wife data/ factory reset and press power button for confirm it.

6) On the next steps the android recovery option want form you conformation you want to factory reset your android device? IF you select “Yes” then all data will delete form your Smartphone.

7) Wait some time work is running after done the factory reset the phone again show android recovery option; now you should select reboot the mobile via volume (+) or (-). After sleeting press power button and your android device is reboot now.

8) All work is done!!! Now see your mobile is same as new cell phone. Setup step by step like just new android phone setup.

How to Factory Hard Reset Lenovo Vibe P1 Turbo

Here’s the tutorial to Soft and Hard Reset Lenovo Vibe P1 Turbo to solve the problems and to restore the device to the state when it was in the box. All the settings, data and application will be removed. To unlock the device when you forgot the password, fixing any malfunction of device or to remove user data before selling to others hard reset will be useful. 

Lenovo Vibe P1 Turbo Specifications: 

SIM	Dual SIM (GSM / HSPA / LTE)
SIZE	5.5 inches, IPS capacitive touchscreen with Corning Gorilla Glass 3
DISPLAY	1080 x 1920 pixels (401 ppi pixel density)
OS	Android OS, v5.1 (Lollipop)
CAMERA	Rear Camera: 13 MP | Front Camera: 5 MP
MEMORY	32 GB Internal Memory | Expandable upto 128 GB via microSD card
RAM	3 GB RAM
CPU	Qualcomm Snapdragon 615 Processor
GPU	Adreno 405
BATTERY	Non-removable Li-Po 5000 mAh battery

#Option 1: Hard Reset of Lenovo Vibe P1 Turbo By Using Software Menu Settings:

1. Make sure that battery is not empty
2. Make sure to backup all important data
3. Turn on the Lenovo Vibe P1 Turbo
4. Go to Settings > System > Backup & reset
5. Select Factory data reset and continue with Reset Phone
6. Lenovo Vibe P1 Turbo will do the process of master reset and make it to factory default.

#Option 2: Hard Reset of Lenovo Vibe P1 Turbo By Using Hardware Key Buttons:

1. Make sure the battery is not empty
2. Make sure to backup all important data
3. Turn off Lenovo Vibe P1 Turbo
4. Press Power Button + Volume Up Button for few seconds, that the warning will appear at the Lenovo Vibe P1 Turbo                                                                         Alternative: You can also try to press Power Button until the Logo appears, then press Volume Up + Volume Down Buttons together until the Recovery menu appears
5. Select Reset Device or Wipe data or Clear eMMC 
6. The smartphone will do the process and make it to factory default.

#Option 3: Hard Reset of Lenovo Vibe P1 Turbo By Using Secret Security Key Code:

• For now, there is no secret security key code to hard reset Lenovo Vibe P1 Turbo. So you can follow the above procedures.

Warning !

Hard Reset will erase all your data.
Do at your own risk.

#If you have any questions or queries after thoroughly going through the Factory Hard Reset Lenovo Vibe P1 Turbo post content, you can leave them in the comments section below and they will be answered with the best information available.