Intex Aqua 3G+ (Plus) Pattern Unlock Done Without Flash

In this device i was try to hard reset for remove pattern lock but not success using every tricks volume keys for power but if you want to remove pattern lock without flashing then you can use this tutorial because this is every simple tricks no nay risk or will be any issue because this is tested by me without any error and just a few minute in this tutorial i use miracle box for that but don't worry you can other use chines box but will be option in that because you can't pattern unlock without option, in internet one other way for pattern unlock just you have to download few mb flash file and you can do job using sp flash tool and it also simple way for that just remember every needed for pattern unlock now let's go how to pattern unlock intex aqua 3g+ using miracle box ?

Download Link

Intex Aqua 3G+ (Plus) Pattern Unlock file only Download Here

Intex Aqua 3G+ (Plus) full firmware Download Here

ResearchDownload_VER_2.9.7006 Download Here

Required for Pattern Unlock:

1. Intex Aqua 3G+ (plus) device with good battery charged

2. Miracle box (you can use other chines box)

3. Micro usb cable

4. Computer or Laptop

Procedure:

1. First download tested firmware or unlock file from above link

2. Open Miracle box

3. Go to SPD Tab

4. Choose Write option

5. Select correct boot option : SPD8825/6825/Other{Factory File Write)

6. Choose firmware file which you was downloaded

7. Tick on USBCable option

8. Now last click on Start button

9. Press and hold Volume Down button and insert usb cable

10. After few second wait then one popup box there untick all without 'USERDATA' then click ok

11. Wait until process

12. Congratulation you are done