Samsung SM-G130E Charging Jumper Solution Usb Ways

Samsung SM-G130E Charging Jumper Solution Usb Ways
Samsung G130E Charging Ways Usb Jumper Solution

In Samsung Galaxy Star 2 G130E USB cable connector is also used for charging the phone. Because of excessive use or any other reason USB connector can be damaged.
So if you are experiencing any charging problem or problem connecting your Samsung SM-G130E Charging Ways Solution Usb Jumper to your computer via USB cable then it is possible that your Samsung Galaxy Star 2 G130E charging connector is faulty. Replacing it with a new one is the only solution here. But if by any chance the USB connector prints are broken then you have to make the jumpers as shown in the diagram below.
First check the fuse if open or damaged, second check the diode if shorted. Check the resistor near the power IC. Re-solder or replace if damaged. Trace the VCHARGE (charging voltage) line paths and the ground of the charging pad

Resolving Samsung Galaxy Star 2 G130E charging problem:
Normally Samsung SM-G130E charging problem is due to faulty charging connector, and in order to overcome that, all you have to do is to:
Remove Battery cover, Battery and C cover, then check charging connector’s pins
First Clean and remount all the pins of charging connector.
Put Battery in again and connect charger. Then check the fuse and the and the diode, replace if found damaged.
If you have further questions please don’t hesitate to leave a comment.

Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.

Samsung SM-G130E Charging Solution Jumper Problem Ways No Charging Not Supporte