SAMSUNG SM-G532F ROOT FLE

                                                             
                                                                  DOWNLOAD LINK

Samsung SM-G130E Charging Jumper Solution Usb Ways

Samsung SM-G130E Charging Jumper Solution Usb Ways
Samsung G130E Charging Ways Usb Jumper Solution

In Samsung Galaxy Star 2 G130E USB cable connector is also used for charging the phone. Because of excessive use or any other reason USB connector can be damaged.
So if you are experiencing any charging problem or problem connecting your Samsung SM-G130E Charging Ways Solution Usb Jumper to your computer via USB cable then it is possible that your Samsung Galaxy Star 2 G130E charging connector is faulty. Replacing it with a new one is the only solution here. But if by any chance the USB connector prints are broken then you have to make the jumpers as shown in the diagram below.
First check the fuse if open or damaged, second check the diode if shorted. Check the resistor near the power IC. Re-solder or replace if damaged. Trace the VCHARGE (charging voltage) line paths and the ground of the charging pad

Resolving Samsung Galaxy Star 2 G130E charging problem:
Normally Samsung SM-G130E charging problem is due to faulty charging connector, and in order to overcome that, all you have to do is to:
Remove Battery cover, Battery and C cover, then check charging connector’s pins
First Clean and remount all the pins of charging connector.
Put Battery in again and connect charger. Then check the fuse and the and the diode, replace if found damaged.
If you have further questions please don’t hesitate to leave a comment.

Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.

Samsung SM-G130E Charging Solution Jumper Problem Ways No Charging Not Supporte

Samsung Galaxy S6 Edge+ G928C Back light Ways Solution Lcd Jumper

n this post, I will answer display-related problems with the Samsung Galaxy S6 Edge Plus G928C. The issues I included here are from our readers. The first one is about the blank screen that started after the phone fell and hit the floor. Common sense would tell us the drop may have messed up the phone and we really don’t know the extent of the damage. If you encountered this kind of problem as well, read on to know what needs to be done.

Display light is also referred to as back light, and is known to be one of the rarest problems that occur with Samsung Galaxy Note.
In the following lines you will get to know the method to resolve Samsung SM-G928C Display Light problem:

Problem
Display light / Back light not working.
Hardware Solution

The very first thing that you need to do is to re-solder all the pins of Note Display on-board connector and check LCD screen.
If the above step fails then check it with a good working LCD screen.
Now check both capacitors (Capacitor 1 and Capacitor 2) with their side’s first pin of display on-board connector. If any of them is faulty, replace them.
Now Check Continuity between +ve terminal of the battery with display IC’s first pin.
Check all the display IC capacitors for continuity, if any of them is faulty then change it.
If the above step fails then gently heat display IC and check, if it still fails then change it.
If everything fails then check with any other good and working LCD Screen.
The above-mentioned steps will surely help you to resolve all of your Nokia 215 Display screen problems, hence allowing you to use your phone flawlessly without any trouble.

Samsung SM-G928C,LCD,Display,Solution,Jumper,Problem,Ways
Samsung Galaxy S6 Edge+ G928C LCD Display Light IC Solution Jumper Problem Ways LCD Display Light Not Working

Samsung Galaxy J2 J200G Power On Off Button Ways Solution Jumper

Samsung Galaxy J2 J200G Power On Off Button Ways Solution Jumper

Samsung SM-GJ200M Power On-Off Button Ways Switch Jumper
Samsung SM-J200G Power Key Jumper On-Off Button Ways Solution

Here’s the jumper ways solution for Samsung Galaxy J2 J200G ON and OFF switch if the handset device showed charging indication when the battery charger is plug-in but unable to power up when the power button is being pressed.
Besides that, a problem in power button might also cause your phone to restart at times, which becomes very much annoying and it troubles you to the masses.

In the following lines you will get to know about Samsung J200G power button problems as well as their solutions:
Workaround
For Samsung Galaxy J2 J200G power button problem there is no work around method, however you can try using a pin and move it all around the Samsung SM-J200G power button, as this might be able to take away some stiffness from your power button

Samsung Galaxy J2 J200G Power Switch Hardware Solution

The two upper or legs of the power switch is connected to the PCB’s ground lines.
The other two which is in lower is the power switch line paths, just locate the test spots as shown on the solution above where to apply a jumper to reconnect it connection.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process

Samsung SM-J200G,Power Button,Power Key,Power Switch,On Off Button, On Off Switch, Power Problem

Nokia Lumia 635 Mic Problem Repair Solution Microphone Ways

Nokia Lumia 635 Mic Problem Repair Solution Microphone Ways

Nokia Lumia 635 Mic Solution Jumper Problem Ways Mic Not Working Microphone

Today we are going to give in this post, how to fix the mic problem in the hardware of Nokia Lumia 635 by jumper solution. In this type of problem you can hear the voice of others on call, While they aren’t able to hear you.
How to fix the Mic not working problem
Here in below you can see the image, That image says to fix the mic problem. Just you may have to do two Works of your phone hardware area, Then it will work.
Changing Nokia Lumia 635 mic can be a little tricky. It is soldered on the motherboard so if you remove it remember it’s placing position and put the new microphone the same way the old one was. If you have broken prints of the microphone connection points I have marked all of them in the diagram below.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.

                                                  

Reason for the mic not working problem?
A lot of reasons available for mic not working error come to Nokia Lumia 635 phone. Therefore, we give some main reason for the problem.

Water damage or Water drops going in the phone (moisture)
Throwing On the ground
Christening in tight trousers
Dust going in Mic hole
Mic paths broken or mic area spare parts Being not work
If you have any further Questions please leave a message.
Keep in mind:- The every solutions posted on Our website is well tested before by our specialist team, But still we do not take any responsibility for any damage it may cause to your cell phone. Use these repairing solutions at your own Risk, Thank you.

Nokia Lumia 635 Mic Solution Jumper Problem Ways Mic Not Working Microphone
Nokia 635,Mic,Microphone,Mic Problem,Mic Solution,Mic Jumpers,Mic Ways

Lg h502f flash done by lg flash tool��

samsung sm-g532f root done.